Handling Instructions
|
1: Roll
out the floor where you want to use it.
2. Make
sure that all valves are closed.
3.
Install the host onto the top nozzle on the pump. 4. Open one valve and plug the pump into that 5. Pusch the orange button, to start the pump. 6. The red button starts the turbo blower. Use it carefully and turn of the turbo in the end of the filling. Only use the turbo pump sparingly in short sequenses. 7. Inflation of the floor takes approx 7-8 minutes. |
  |
|
Deflation procedure 1.Attache the hose on the lower nozzle. 2. Open one valve, attache the tube to the valve. 3. Start the pump, remember to be careful using the turbo function (red button) and turn it of a while berfore the floor is completely empty.
(if
properly done it will have a storage space of 120x70x50 cm,s) |
 |
|
|